Clifton Roof Pros provides professional chimney flashing in Clifton, NJ for residential and commercial properties across the north Jersey inner ring. Nearly every chimney in Clifton is brick, stands on a side wall, and sits in the narrow gap between two buildings. The whole repair therefore happens in that gap, which is why so many of them were sealed from a ladder instead of rebuilt.
Start with the dust, because it is the part that gets a crew thrown off a street. A masonry blade cutting brick dry throws silica across two properties, and in a five-foot side yard it goes through an open window and settles on the car parked beside it. We cut wet, on a shrouded blade with a vacuum, and the adjacent wall and glazing are sheeted before the saw leaves the van.
What we usually find underneath is aluminum bent over the brick face and bedded in black mastic, or a bead of urethane run along the joint where the roof meets the stack. Both are two-year repairs sold as permanent ones. Aluminum sitting directly against fresh mortar corrodes as well, so half of what we pull off has already gone chalky and thin along its bottom edge.
A stack that keeps water out has two independent metal planes that are free to move against one another. The lower plane is woven into the covering, one piece per course, turned up the brick. The upper plane is let into a kerf cut roughly an inch deep, folded down over the lower one, wedged with lead at close centers and sealed along the kerf alone. Nothing pins the two together.
Behind a wide stack the water has to be sent somewhere. Anything much over thirty inches across gets a framed saddle so runoff splits and passes rather than banking against masonry and freezing there. A lot of the older houses here never received one, and the sheathing directly uphill of the brick is where our probe goes through first. The saddle gets its own membrane and its own metal.
Then look above the flashing, because plenty of what gets reported to us as a flashing leak is arriving down the flue. A cracked wash at the top, no rain cap, faces spalling where the brick froze saturated, joints you can rake out with a key. Those want a mason and we will say so. The metal only ever does its half of the job.
Our insured and bonded team brings the right materials and equipment to every job — six-nail fastening through the double-thickness laminate zone, 3/8-inch plywood overlay across spaced 1x6 board sheathing, shingle-over drip-edge intake vents at a closed cornice, self-adhered SBS modified bitumen with a granulated cap sheet, seamless .032 aluminum K-style gutter formed at the curb, three-by-four downspouts on a piped curbside leader — and backs the work with a written workmanship warranty. We serve Clifton and nearby communities including Passaic, Paterson, Wayne, Hawthorne.
What We Handle
Everything our chimney flashing in Clifton covers
One crew, one point of contact, and the full range of chimney flashing work in Clifton, NJ. If it is on this list we do it in house rather than handing it to a subcontractor:
- chimney flashing repair clifton
- chimney leak repair
- step flashing installation
- counter flashing reglet
- chimney cricket installation
- chimney crown repair
- chase cover replacement
- masonry chimney leak clifton nj
- roof to wall flashing
- chimney cap installation
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Clifton services.
Materials, equipment and how we do chimney flashing
The difference between chimney flashing that lasts and chimney flashing that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with six-nail fastening through the double-thickness laminate zone, 3/8-inch plywood overlay across spaced 1x6 board sheathing, shingle-over drip-edge intake vents at a closed cornice, self-adhered SBS modified bitumen with a granulated cap sheet, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Clifton job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of roofing work in the north Jersey inner ring means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do chimney flashing outside Clifton
Clifton Roof Pros covers Clifton and the surrounding communities of the north Jersey inner ring. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Chimney Flashing in Passaic, NJ — Passaic County, population 70,537
- Chimney Flashing in Paterson, NJ — Passaic County, population 159,732
- Chimney Flashing in Wayne, NJ — Passaic County, population 54,838
- Chimney Flashing in Hawthorne, NJ — Passaic County, population 19,637
- Chimney Flashing in Woodland Park, NJ — Passaic County, population 13,484
- Chimney Flashing in Little Falls, NJ — Passaic County, population 13,360
Start on the Clifton Roof Pros homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Clifton Chooses Clifton Roof Pros
- ✓We walk the property line before we price the roof, and the estimate names where the container, the ladders and the debris chute will actually stand
- ✓Nothing lands on the next lot: plywood shields against the adjoining wall and windows, a catch platform at the eave, and a magnet sweep of both driveways every shift
- ✓Whatever we open is dried in the same day, because a lot this size has nowhere to store an open roof overnight
- ✓Low-slope work on rear extensions is self-adhered or cold-applied and never torched, because the next frame building is ten feet away
The standards behind chimney flashing
Quality here is not a matter of opinion — it is written down. The chimney flashing work we do in Clifton follows published industry standards: NRCA publishes the Roofing Manual, the industry's reference for details and slope minimums, and Asphalt Roofing Manufacturers Association sets the shingle application and ventilation guidance the warranties reference. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every chimney flashing project in Clifton gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free chimney flashing free estimate in Clifton, or request a quote and we'll get right back to you.